300 Stainless Steel Sheet, Unpolished (Mill) Finish, AMS 5513/SAE AMS 5516, 0.020" Thickness, 20" Width, 24" Length
Blowout Sale! Free Shipping Included! Save 58% on the 300 Stainless Steel Sheet, Unpolished (Mill) Finish, AMS 5513/SAE AMS 5516, 0.020'' Thickness, 20'' Width, 24'' Length by Small Parts at FH Civic. MPN: 72020. Hurry! Limited time offer. Offer valid only while supplies last. The 300 stainless steel sheet has an unpolished (mill) surface, meets SAE Aerospace Material Specifications AMS 5513 and 5516 specifications, and has
The 300 stainless steel sheet has an unpolished (mill) surface, meets SAE Aerospace Material Specifications AMS 5513 and 5516 specifications, and has a standard tolerance. The 300 stainless steel grade provides better corrosion resistance than general-purpose 304 stainless steel, especially in marine environments, due to higher nickel content and the addition of molybdenum. An austenitic stainless steel, 300 is typically nonmagnetic and can be cold worked to increase its hardness and strength while maintaining most of its formability.
Stainless steel is an iron alloy with resistance to staining and rusting in many environments where steel would typically degrade. The chemical composition of each grade creates a grain structure that falls into one of five classes: austenitic, duplex, ferritic, martensitic, and precipitation hardening. The austenitic class contains the most formable, weldable, and corrosion-resistant stainless steel grades, but they cannot be heat treated. The duplex class offers high resistance to pitting and chloride stress corrosion cracking. Duplex grades are heat treatable and roughly twice as strong as austenitic grades. The ferritic class contains moderately formable and corrosion-resistant grades compared to other stainless steel classes, but they cannot be heat treated. The martensitic class includes some of the hardest and strongest stainless steel grades that also offer mild corrosion resistance, high hardness, and good formability. Martensitic grades can be heat treated. The precipitation-hardening (PH) class can be heat treated after fabrication to achieve some of the highest hardness ratings in stainless steel.
Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. Corrosion resistance describes the material's ability to prevent deterioration caused by atmosphere, moisture, or other medium. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Toughness describes the material's ability to absorb energy before breaking, while hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. Formability indicates how easily the material can be permanently shaped. Machinability describes how easily it can be cut, shaped, finished, or otherwise machined, while weldability characterizes the ability to be welded. Magnetism characterizes how much the material is repelled by or attracted to a magnet.
Features & Highlights
- 300 stainless steel provides better corrosion resistance than 304 stainless steel
- Unpolished (mill) surface has no finish
- Meets AMS 5513 and 5516 specifications
- Standard tolerance
|Manufacturer:||Precision Brand Products, Inc.|
|Publisher:||Precision Brand Products, Inc.|
|Studio:||Precision Brand Products, Inc.|
|Package Weight:||5.85 pounds|
|Package Size:||25 x 1.5 x 1.5 inches|